Attenuators are designed to reduce optical signal levels in communications systems to a desired power range. Fiber-Conn® attenuators offer stable and accurate attenuation values, low back-reflection and a variety of different connector and fiber types. These attenuators are widely used in optical transmission systems, telecommunication applications, test equipment and CATV solutions.
The attenuation values of Fiber-Conn® standard in-line attenuators range from 5 to 20 dB, available in 5 dB increments. Custom configurations are available upon request.
| Product Specifications: |
|
| Attenuation |
Attenuation Tolerance |
| 1 - 9.9 dB |
+/- 0.5 dB |
| 10-19.9 dB |
+/- 1.0 dB |
| 20 dB - higher |
+/- 1.5 dB |
|
In-line Attenuator details (standard lengths are 5 meters or under):
| Non-jacketed 900 micron in-line attenuators |
Length tolerance: 0-4 inches |
| Jacket in-line attenuators |
Length tolerance: 0-8 inches |
| 2 meters and under in length |
Attenuator in middle of assembly |
| Over 2 meters |
Attenuator located 1m from end A |
|
For wrap-style or loopback attenuators, click here.
|
